Spools 3

Momoi Monofilament

Spools 1 Spools 2

Spool Controls

Brand Valve with Lindgren-Pitman Base

Brand Valve with Lindgren-Pitman base for remote control operation.

Morse remote control assembly.

Brand Control Valve with handle.

Internal pressure compensated flow control valve with tandem metering spool and precise control for metering. When locked in neutral, the pump unloads to the hydraulic tank. It is preset for 12 GPM maximum. This 4 way valve has a friction detent which holds the control lever at any position. The valve comes equipped with a long lever handle.

Spare Parts

Lindgren-Pitman LS-3, LS-4 LineSetter spare Parts

1. Main Drive Wheel
2. Hydraulic Motor Assembly
3. Exit Guide Plate
4. 6" V-Groove Pulley with bearings
5. Main Drive Element
6. Entrance Guide Roller
7. Upper Idler Roller
8. Upper Idler Arm
9. Idler Arm Bracket
10. Replacement Beeper
11. Handle Assembly
12. TranTorque Assembly
13. Idler Drive O-ring
14. Motor Shaft Seal
15. Lexan Exit Shield
16. Hour Glass Roller
17. Optional Speed Read-out
18. Optional Timer/Beeper

Level-Wind Spare Parts

1. Link Belt
2. 3" Pulley
3. Level Wind Pawl
4. Bearing (Rulon)
5. 2 Bolt Flange Bearing
6. Pulley
7. Double Bar Block
8. Single Bar Block

Hydraulic Cartridge Kits

Replacement Cartridge Kit for KYB Manifold

1. Flow control
2. Relief: Factory set @2500 PSI
3. Check Valve (2 required)
4. Check Valve
5. Counter Balance

Replacement Cartridge Kit for Line Setters.

Complete kit consists of the following:
6. Bypass Compensator, Relief Valve
7. Needle Valve speed control
8. Needle Valve On-Off
9. Check Valve
10 Check Valve

Spools 1 Spools 2

Send mail to hiliner@ns.sympatico.ca with questions or comments about this web site.